linux错误类型列表

    技术2022-07-12  72

    常用的错误类型说明

    #ifndef _ASM_GENERIC_ERRNO_BASE_H#define _ASM_GENERIC_ERRNO_BASE_H

    #define EPERM   1 /* Operation not permitted */#define ENOENT   2 /* No such file or directory */#define ESRCH   3 /* No such process */#define EINTR   4 /* Interrupted system call */#define EIO   5 /* I/O error */#define ENXIO   6 /* No such device or address */#define E2BIG   7 /* Argument list too long */#define ENOEXEC   8 /* Exec format error */#define EBADF   9 /* Bad file number */#define ECHILD  10 /* No child processes */#define EAGAIN  11 /* Try again */#define ENOMEM  12 /* Out of memory */#define EACCES  13 /* Permission denied */#define EFAULT  14 /* Bad address */#define ENOTBLK  15 /* Block device required */#define EBUSY  16 /* Device or resource busy */#define EEXIST  17 /* File exists */#define EXDEV  18 /* Cross-device link */#define ENODEV  19 /* No such device */#define ENOTDIR  20 /* Not a directory */#define EISDIR  21 /* Is a directory */#define EINVAL  22 /* Invalid argument */#define ENFILE  23 /* File table overflow */#define EMFILE  24 /* Too many open files */#define ENOTTY  25 /* Not a typewriter */#define ETXTBSY  26 /* Text file busy */#define EFBIG  27 /* File too large */#define ENOSPC  28 /* No space left on device */#define ESPIPE  29 /* Illegal seek */#define EROFS  30 /* Read-only file system */#define EMLINK  31 /* Too many links */#define EPIPE  32 /* Broken pipe */#define EDOM  33 /* Math argument out of domain of func */#define ERANGE  34 /* Math result not representable */

    #endif

     

     

    #ifndef _ASM_GENERIC_ERRNO_H#define _ASM_GENERIC_ERRNO_H

    #include <asm-generic/errno-base.h>

    #define EDEADLK  35 /* Resource deadlock would occur */#define ENAMETOOLONG 36 /* File name too long */#define ENOLCK  37 /* No record locks available */#define ENOSYS  38 /* Function not implemented */#define ENOTEMPTY 39 /* Directory not empty */#define ELOOP  40 /* Too many symbolic links encountered */#define EWOULDBLOCK EAGAIN /* Operation would block */#define ENOMSG  42 /* No message of desired type */#define EIDRM  43 /* Identifier removed */#define ECHRNG  44 /* Channel number out of range */#define EL2NSYNC 45 /* Level 2 not synchronized */#define EL3HLT  46 /* Level 3 halted */#define EL3RST  47 /* Level 3 reset */#define ELNRNG  48 /* Link number out of range */#define EUNATCH  49 /* Protocol driver not attached */#define ENOCSI  50 /* No CSI structure available */#define EL2HLT  51 /* Level 2 halted */#define EBADE  52 /* Invalid exchange */#define EBADR  53 /* Invalid request descriptor */#define EXFULL  54 /* Exchange full */#define ENOANO  55 /* No anode */#define EBADRQC  56 /* Invalid request code */#define EBADSLT  57 /* Invalid slot */

    #define EDEADLOCK EDEADLK

    #define EBFONT  59 /* Bad font file format */#define ENOSTR  60 /* Device not a stream */#define ENODATA  61 /* No data available */#define ETIME  62 /* Timer expired */#define ENOSR  63 /* Out of streams resources */#define ENONET  64 /* Machine is not on the network */#define ENOPKG  65 /* Package not installed */#define EREMOTE  66 /* Object is remote */#define ENOLINK  67 /* Link has been severed */#define EADV  68 /* Advertise error */#define ESRMNT  69 /* Srmount error */#define ECOMM  70 /* Communication error on send */#define EPROTO  71 /* Protocol error */#define EMULTIHOP 72 /* Multihop attempted */#define EDOTDOT  73 /* RFS specific error */#define EBADMSG  74 /* Not a data message */#define EOVERFLOW 75 /* Value too large for defined data type */#define ENOTUNIQ 76 /* Name not unique on network */#define EBADFD  77 /* File descriptor in bad state */#define EREMCHG  78 /* Remote address changed */#define ELIBACC  79 /* Can not access a needed shared library */#define ELIBBAD  80 /* Accessing a corrupted shared library */#define ELIBSCN  81 /* .lib section in a.out corrupted */#define ELIBMAX  82 /* Attempting to link in too many shared libraries */#define ELIBEXEC 83 /* Cannot exec a shared library directly */#define EILSEQ  84 /* Illegal byte sequence */#define ERESTART 85 /* Interrupted system call should be restarted */#define ESTRPIPE 86 /* Streams pipe error */#define EUSERS  87 /* Too many users */#define ENOTSOCK 88 /* Socket operation on non-socket */#define EDESTADDRREQ 89 /* Destination address required */#define EMSGSIZE 90 /* Message too long */#define EPROTOTYPE 91 /* Protocol wrong type for socket */#define ENOPROTOOPT 92 /* Protocol not available */#define EPROTONOSUPPORT 93 /* Protocol not supported */#define ESOCKTNOSUPPORT 94 /* Socket type not supported */#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */#define EPFNOSUPPORT 96 /* Protocol family not supported */#define EAFNOSUPPORT 97 /* Address family not supported by protocol */#define EADDRINUSE 98 /* Address already in use */#define EADDRNOTAVAIL 99 /* Cannot assign requested address */#define ENETDOWN 100 /* Network is down */#define ENETUNREACH 101 /* Network is unreachable */#define ENETRESET 102 /* Network dropped connection because of reset */#define ECONNABORTED 103 /* Software caused connection abort */#define ECONNRESET 104 /* Connection reset by peer */#define ENOBUFS  105 /* No buffer space available */#define EISCONN  106 /* Transport endpoint is already connected */#define ENOTCONN 107 /* Transport endpoint is not connected */#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */#define ETOOMANYREFS 109 /* Too many references: cannot splice */#define ETIMEDOUT 110 /* Connection timed out */#define ECONNREFUSED 111 /* Connection refused */#define EHOSTDOWN 112 /* Host is down */#define EHOSTUNREACH 113 /* No route to host */#define EALREADY 114 /* Operation already in progress */#define EINPROGRESS 115 /* Operation now in progress */#define ESTALE  116 /* Stale NFS file handle */#define EUCLEAN  117 /* Structure needs cleaning */#define ENOTNAM  118 /* Not a XENIX named type file */#define ENAVAIL  119 /* No XENIX semaphores available */#define EISNAM  120 /* Is a named type file */#define EREMOTEIO 121 /* Remote I/O error */#define EDQUOT  122 /* Quota exceeded */

    #define ENOMEDIUM 123 /* No medium found */#define EMEDIUMTYPE 124 /* Wrong medium type */#define ECANCELED 125 /* Operation Canceled */#define ENOKEY  126 /* Required key not available */#define EKEYEXPIRED 127 /* Key has expired */#define EKEYREVOKED 128 /* Key has been revoked */#define EKEYREJECTED 129 /* Key was rejected by service */

    /* for robust mutexes */#define EOWNERDEAD 130 /* Owner died */#define ENOTRECOVERABLE 131 /* State not recoverable */

    #endif

     

    /* Error constants.  Linux specific version.   Copyright (C) 1996, 1997, 1998, 1999, 2005 Free Software Foundation, Inc.   This file is part of the GNU C Library.

       The GNU C Library is free software; you can redistribute it and/or   modify it under the terms of the GNU Lesser General Public   License as published by the Free Software Foundation; either   version 2.1 of the License, or (at your option) any later version.

       The GNU C Library is distributed in the hope that it will be useful,   but WITHOUT ANY WARRANTY; without even the implied warranty of   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU   Lesser General Public License for more details.

       You should have received a copy of the GNU Lesser General Public   License along with the GNU C Library; if not, write to the Free   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA   02111-1307 USA.  */

    #ifdef _ERRNO_H

    # undef EDOM# undef EILSEQ# undef ERANGE# include <linux/errno.h>

    /* Linux has no ENOTSUP error code.  */# define ENOTSUP EOPNOTSUPP

    /* Older Linux versions also had no ECANCELED error code.  */# ifndef ECANCELED#  define ECANCELED 125# endif

    /* Support for error codes to support robust mutexes was added later, too.  */# ifndef EOWNERDEAD#  define EOWNERDEAD  130#  define ENOTRECOVERABLE 131# endif

    # ifndef __ASSEMBLER__/* Function to get address of global `errno' variable.  */extern int *__errno_location (void) __THROW __attribute__ ((__const__));

    #  if !defined _LIBC || defined _LIBC_REENTRANT/* When using threads, errno is a per-thread value.  */#   define errno (*__errno_location ())#  endif# endif /* !__ASSEMBLER__ */#endif /* _ERRNO_H */

    #if !defined _ERRNO_H && defined __need_Emath/* This is ugly but the kernel header is not clean enough.  We must   define only the values EDOM, EILSEQ and ERANGE in case __need_Emath is   defined.  */# define EDOM 33 /* Math argument out of domain of function.  */# define EILSEQ 84 /* Illegal byte sequence.  */# define ERANGE 34 /* Math result not representable.  */#endif /* !_ERRNO_H && __need_Emath */

    Processed: 0.010, SQL: 9