由Nordic SDK的gcc编译文件修改
Makefile:
########################################################################################################################## # File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Fri Jul 03 22:12:12 CST 2020] ########################################################################################################################## # ------------------------------------------------ # Generic Makefile (based on gcc) # # ChangeLog : # 2017-02-10 - Several enhancements + project update mode # 2015-07-22 - first version # ------------------------------------------------ ###################################### # building variables ###################################### # debug build? DEBUG = 1 ###################################### # target ###################################### TARGET = stmm32wb55_prohect1 PROJECT_NAME := stmm32wb55_prohect1 TARGETS := stm32wb55xx OUTPUT_DIRECTORY := _build HAL_DRIVER := Drivers/STM32WBxx_HAL_Driver PROJ_DIR := Src/ $(OUTPUT_DIRECTORY)/stm32wb55xx.out: \ LINKER_SCRIPT := stm32wb55xx_flash_cm4.ld SRC_FILES += \ Src/main.c \ Src/stm32wbxx_it.c \ Src/stm32wbxx_hal_msp.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \ Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \ Src/system_stm32wbxx.c\ startup_stm32wb55xx_cm4.s\ Src/a.cpp \ # Include folders common to all targets INC_FOLDERS += \ Inc \ Drivers/STM32WBxx_HAL_Driver/Inc \ Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \ Drivers/CMSIS/Device/ST/STM32WBxx/Include \ Drivers/CMSIS/Include \ Drivers/CMSIS/Include # Libraries common to all targets LIB_FILES += \ # Optimization flags OPT = -O3 -g3 # Uncomment the line below to enable link time optimization #OPT += -flto # C flags common to all targets CFLAGS += $(OPT) CFLAGS += -DUSE_HAL_DRIVER CFLAGS += -DSTM32WB55xx CFLAGS += -mcpu=cortex-m4 CFLAGS += -mthumb -mabi=aapcs CFLAGS += -Wall -Werror CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 # keep every function in a separate section, this allows linker to discard unused ones CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing CFLAGS += -fno-builtin -fshort-enums ifeq ($(DEBUG), 1) CFLAGS += -g -gdwarf-2 endif # C++ flags common to all targets CXXFLAGS += $(OPT) # Assembler flags common to all targets ASMFLAGS += -g3 ASMFLAGS += -mcpu=cortex-m4 ASMFLAGS += -mthumb -mabi=aapcs ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 # Linker flags LDFLAGS += $(OPT) LDFLAGS += -mthumb -mabi=aapcs -T$(LINKER_SCRIPT) LDFLAGS += -mcpu=cortex-m4 LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 # let linker dump unused sections LDFLAGS += -Wl,--gc-sections # use newlib in nano version LDFLAGS += --specs=nano.specs # Add standard libraries at the very end of the linker input, after all objects # that may need symbols provided by these libraries. LIB_FILES += -lc -lnosys -lm -lstdc++ .PHONY: default help # Default target - first one defined default: stm32wb55xx # Print all targets that can be built help: @echo following targets are available: @echo stm32wb55xx @echo flash_softdevice @echo sdk_config - starting external tool for editing sdk_config.h @echo flash - flashing binary TEMPLATE_PATH := toolchain/gcc include $(TEMPLATE_PATH)/Makefile.common $(foreach target, $(TARGETS), $(call define_target, $(target)))dump.mk
$(info $($(VARIABLE))) all: ;Makefile.common
# Copyright (c) 2016 - 2017, Nordic Semiconductor ASA # # All rights reserved. # # Redistribution and use in source and binary forms, with or without modification, # are permitted provided that the following conditions are met: # # 1. Redistributions of source code must retain the above copyright notice, this # list of conditions and the following disclaimer. # # 2. Redistributions in binary form, except as embedded into a Nordic # Semiconductor ASA integrated circuit in a product or a software update for # such product, must reproduce the above copyright notice, this list of # conditions and the following disclaimer in the documentation and/or other # materials provided with the distribution. # # 3. Neither the name of Nordic Semiconductor ASA nor the names of its # contributors may be used to endorse or promote products derived from this # software without specific prior written permission. # # 4. This software, with or without modification, must only be used with a # Nordic Semiconductor ASA integrated circuit. # # 5. Any software provided in binary form under this license must not be reverse # engineered, decompiled, modified and/or disassembled. # # THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES # OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE # DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT # OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Options: # VERBOSE=1 (default is 0) - print each executed command # PRETTY=1 (default is 0) - show progress, in percentage # ABSOLUTE_PATHS=1 (default is 0) - convert all include folders and source # file paths to their absolute forms # PASS_INCLUDE_PATHS_VIA_FILE=1 (default is 0) - use <target>.inc file # to pass include paths to gcc # PASS_LINKER_INPUT_VIA_FILE=0 (default is 1) - don't use <target>.in file # to pass the list of linker input files VERBOSE ?= 0 PRETTY ?= 0 ABSOLUTE_PATHS ?= 0 PASS_INCLUDE_PATHS_VIA_FILE ?= 0 PASS_LINKER_INPUT_VIA_FILE ?= 1 .SUFFIXES: # ignore built-in rules %.d: # don't try to make .d files .PRECIOUS: %.d %.o MK := mkdir RM := rm -rf # echo suspend ifeq ($(VERBOSE),1) NO_ECHO := else NO_ECHO := @ endif ifneq (,$(filter clean, $(MAKECMDGOALS))) OTHER_GOALS := $(filter-out clean, $(MAKECMDGOALS)) ifneq (, $(OTHER_GOALS)) $(info Cannot make anything in parallel with "clean".) $(info Execute "$(MAKE) clean \ $(foreach goal, $(OTHER_GOALS),&& $(MAKE) $(goal))" instead.) $(error Cannot continue) else .PHONY: clean clean: $(RM) $(OUTPUT_DIRECTORY) endif # ifneq(, $(OTHER_GOALS)) else # ifneq (,$(filter clean, $(MAKECMDGOALS))) ifndef PROGRESS ifeq ($(PRETTY),1) X := @ EMPTY := SPACE := $(EMPTY) $(EMPTY) TOTAL := $(subst $(SPACE),,$(filter $(X), \ $(shell "$(MAKE)" $(MAKECMDGOALS) --dry-run \ --no-print-directory PROGRESS=$(X)))) 5 := $(X)$(X)$(X)$(X)$(X) 25 := $(5)$(5)$(5)$(5)$(5) 100 := $(25)$(25)$(25)$(25) C := COUNTER = $(eval C := $(C)$(100))$(C) P := count = $(if $(filter $1%,$2),$(eval \ P += 1)$(call count,$1,$(2:$1%=%)),$(eval \ C := $2)) print = [$(if $(word 99,$1),99,$(if $(word 10,$1),, )$(words $1))%] PROGRESS = $(call count,$(TOTAL),$(COUNTER))$(call print,$(P)) $1 else PROGRESS = $1 endif # ifeq ($(PRETTY),1) PLATFORM_SUFFIX := $(if $(filter Windows%,$(OS)),windows,posix) TOOLCHAIN_CONFIG_FILE := $(TEMPLATE_PATH)/Makefile.$(PLATFORM_SUFFIX) include $(TOOLCHAIN_CONFIG_FILE) # $1 path define quote '$(subst ','\'',$(1))' endef # Toolchain commands CC := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-gcc) CXX := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-c++) AS := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-as) AR := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-ar) -r LD := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-ld) NM := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-nm) OBJDUMP := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-objdump) OBJCOPY := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-objcopy) SIZE := $(call quote,$(GNU_INSTALL_ROOT)$(GNU_PREFIX)-size) $(if $(shell $(CC) --version),,$(info Cannot find: $(CC).) \ $(info Please set values in: "$(abspath $(TOOLCHAIN_CONFIG_FILE))") \ $(info according to the actual configuration of your system.) \ $(error Cannot continue)) # Use ccache on linux if available CCACHE := $(if $(filter Windows%,$(OS)),, \ $(if $(wildcard /usr/bin/ccache),ccache)) CC := $(CCACHE) $(CC) endif # ifndef PROGRESS # $1 type of item # $2 items paths to check define ensure_exists_each $(foreach item, $(2), \ $(if $(wildcard $(item)),, $(warning Cannot find $(1): $(item)))) endef ifeq ($(PASS_INCLUDE_PATHS_VIA_FILE),1) INC_PATHS = @$($@_INC) GENERATE_INC_FILE := 1 else INC_PATHS = $(call target_specific, INC_PATHS, $($@_TGT)) GENERATE_INC_FILE := endif # $1 object file # $2 source file # $3 include paths container file # $4 target name define bind_obj_with_src $(eval $(1) := $(2)) \ $(eval $(1)_INC := $(3)) \ $(eval $(1)_TGT := $(4)) \ $(eval $(1): Makefile | $(dir $(1)).) \ $(if $(GENERATE_INC_FILE), $(eval $(1): $(3))) endef # $1 target name # $2 source file name # Note: this additional .o for .s files is a workaround for issues with make 4.1 # from MinGW (it does nothing to remake .s.o files when a rule for .S.o # files is defined as well). define get_object_file_name $(OUTPUT_DIRECTORY)/$(strip $(1))/$(notdir $(2:%.s=%.s.o)).o endef # $1 target name # $2 include paths container file # $3 list of source files define get_object_files $(call ensure_exists_each,source file, $(3)) \ $(foreach src_file, $(3), \ $(eval obj_file := $(call get_object_file_name, $(1), $(src_file))) \ $(eval DEPENDENCIES += $(obj_file:.o=.d)) \ $(call bind_obj_with_src, $(obj_file), $(src_file), $(2), $(1)) \ $(obj_file)) endef # $1 variable name # $2 target name define target_specific $($(addsuffix _$(strip $(2)), $(1))) endef ifeq ($(ABSOLUTE_PATHS),1) get_path = $(call quote,$(abspath $1)) else get_path = $1 endif # $1 list of include folders define get_inc_paths $(call ensure_exists_each,include folder,$(1)) \ $(foreach folder,$(1),-I$(call get_path,$(folder))) endef # $1 target name # $2 include paths container file # $3 build goal name define prepare_build $(eval DEPENDENCIES :=) \ $(eval $(3): \ $(call get_object_files, $(1), $(2), \ $(SRC_FILES) $(call target_specific, SRC_FILES, $(1)))) \ $(eval -include $(DEPENDENCIES)) \ $(eval INC_PATHS_$(strip $(1)) := \ $(call get_inc_paths, \ $(INC_FOLDERS) $(call target_specific, INC_FOLDERS, $(1)))) endef # $1 target name define define_target $(eval OUTPUT_FILE := $(OUTPUT_DIRECTORY)/$(strip $(1))) \ $(eval $(1): $(OUTPUT_FILE).out $(OUTPUT_FILE).hex $(OUTPUT_FILE).bin \ ; @echo DONE $(strip $(1))) \ $(call prepare_build, $(1), $(OUTPUT_FILE).inc, $(OUTPUT_FILE).out) endef # $1 target name # $2 library file name define define_library $(eval OUTPUT_FILE := $(OUTPUT_DIRECTORY)/$(strip $(1))) \ $(eval $(1) := $(2)) \ $(call prepare_build, $(1), $(OUTPUT_FILE).inc, $(1)) endef # $1 content to be dumped # Invokes another instance of MAKE to dump the specified content to stdout, # which may be then redirected in shell to a file and this way stored there. # MAKE in version prior to 4.0 does not provide the $(file ...) function. define dump $(eval CONTENT_TO_DUMP := $(1)) \ "$(MAKE)" -s --no-print-directory \ -f "$(TEMPLATE_PATH)/dump.mk" VARIABLE=CONTENT_TO_DUMP endef export CONTENT_TO_DUMP .PHONY: $(TARGETS) all all: $(TARGETS) # Create build directories $(OUTPUT_DIRECTORY): $(MK) $@ $(OUTPUT_DIRECTORY)/%/.: | $(OUTPUT_DIRECTORY) cd $(OUTPUT_DIRECTORY) && $(MK) $* $(OUTPUT_DIRECTORY)/%.inc: Makefile | $(OUTPUT_DIRECTORY) $(info Generating $@) $(NO_ECHO)$(call dump, $(call target_specific, INC_PATHS, $*)) > $@ # $1 command # $2 flags # $3 message define run $(info $(call PROGRESS,$(3) file: $(notdir $($@)))) \ $(NO_ECHO)$(1) -MP -MD -c -o $@ $(call get_path,$($@)) $(2) $(INC_PATHS) endef # Create object files from C source files %.c.o: $(call run,$(CC) -std=c99,$(CFLAGS),Compiling) # Create object files from C++ source files %.cpp.o: $(call run,$(CXX),$(CFLAGS) $(CXXFLAGS),Compiling C++) # Create object files from assembly source files %.S.o %.s.o.o: $(call run,$(CC) -x assembler-with-cpp,$(ASMFLAGS),Assembling) ifeq ($(PASS_LINKER_INPUT_VIA_FILE),1) GENERATE_LD_INPUT_FILE = $(call dump, $^ $(LIB_FILES)) > $(@:.out=.in) LD_INPUT = @$(@:.out=.in) else GENERATE_LD_INPUT_FILE = LD_INPUT = $^ $(LIB_FILES) endif # Link object files %.out: $(info $(call PROGRESS,Linking target: $@)) $(NO_ECHO)$(GENERATE_LD_INPUT_FILE) $(NO_ECHO)$(CC) $(LDFLAGS) $(LD_INPUT) -Wl,-Map=$(@:.out=.map) -o $@ $(NO_ECHO)$(SIZE) $@ # Create binary .bin file from the .out file %.bin: %.out $(info Preparing: $@) $(NO_ECHO)$(OBJCOPY) -O binary $< $@ # Create binary .hex file from the .out file %.hex: %.out $(info Preparing: $@) $(NO_ECHO)$(OBJCOPY) -O ihex $< $@ endif # ifneq (,$(filter clean, $(MAKECMDGOALS)))
Makefile.posix
GNU_INSTALL_ROOT ?= /usr/local/gcc-arm-none-eabi-9-2020-q2/gcc-arm-none-eabi-9-2020-q2-update/bin/ GNU_VERSION ?= 9.3.1 GNU_PREFIX ?= arm-none-eabi
Makefile.windows
GNU_INSTALL_ROOT := C:/Program Files (x86)/GNU Tools ARM Embedded/7 2018-q2-update/bin/ GNU_VERSION := 7.3.1 GNU_PREFIX := arm-none-eabi
